Makita HR4001C 110V SDS Max Rotary Demolition Hammer Drill With Accessories

The Makita HR4001C SDS Max Rotary Hammer has been developed to surpass competitions in vibration level, operation efficiency and cost-effectiveness. It is equally at home drilling large holes, up to 40mm with a solid drill bit, 105mm with a TCT core bit or fitted with a point or chisel for removing render from the outside of a building or breaking up shallow concrete floors. Packed full of features including 2 lights that are situated on the barrel, one to advise you of power to the motor and a second light to warn you that machine requires a service. The tool is double insulated for increased user safety.

Features

Soft start
Low vibration enables prolonged use
Torque limiter: the drill stops when the bit hits against reinforcements
Electronic-power-control for greater comfort
Dual operation mode: rotary hammer and hammer only
Constant speed under load
Double insulation

Specification

Voltage: 110V
Impact energy: 6.8 J
Max in concrete: 40 mm
Max core diameter (TCT): 105 mm
Blows per minute: 1350-2750 bpm
Input wattage: 1100 w

VIBRATIONS
Vibration K factor: 2.5 m/sec²
No Load Speed: 235 - 480 rpm
Vibration when chiselling: 10.5 m/sec²
Vibration when hammer drilling: 12.5 m/sec²
Noise sound pressure: 92 dB(A)
Noise K factor: 3 dB(A)
Noise sound power: 103 dB(A)

Standard Equipment

1x Makita HR4001C 110V SDS Max Rotary Demolition Hammer Drill
1x 11 x 130mm Pilot Drill
1x 300mm SDS MAX Adaptor
1x 25mm x 520mm SDS MAX Drill Bit
1x 19mm x 540mm SDS MAX Drill Bit
1x 14mm x 540mm SDS MAX Drill Bit
1x 10mm x 540mm SDS MAX Drill Bit
1x 26mm x 520mm SDS MAX Drill Bit
1x 30mm x 570mm SDS MAX Drill Bit
1x 18mm x 540mm SDS MAX Drill Bit
1x 35mm Heavy Duty Core Drill
1x 40mm Heavy Duty Core Drill
1x 45mm Heavy Duty Core Drill
1x 80mm Heavy Duty Core Drill