Makita DLX2214TJ 18v 2 Pieces Combo Kit LXT

Features

DHP481Z Combi Drill

Brushless BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
Forward/reverse rotation
Single sleeve keyless chuck allows for easy bit installation/removal by one hand
Electric brake
Twin LED job light with afterglow 2 mechanical gears
Battery fuel gauge - 3 lights on = more than 50% battery capacity, 2 lights on = 20 to 50% capacity, 1 light on = less than 20% full battery capacity
Variable speed control by trigger
Best possible ergonomic handle for drill-driver applications
Compact overall length of 205mm XPT - Extreme Protection Technology

DTD170Z Impact Driver

New impact mode, 'Assist-Mode' drives slowly to start screw before full tightening to eliminate "screw cam-out" and "cross threading“ TEK mode ('T-mode') reduces impact power during final stages of fastener seating
Electronic 4-stage impact power selection
Massive 175 Nm max tightening torque
More compact body with overall length of just 117mm and lightweight at only 1.5 kg
Brushless DC motor with high power to weight and size ratio
Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
One touch sliding chuck for easy bit installation and removal
Twin LED job lights with pre-glow and afterglow features
Ergonomic soft rubber grip design for vibration absorption and comfortable operation
Variable speed control by trigger with electric brake

Specification

DHP481Z Combi Drill
 
Voltage: 18v
Battery Compatibility: 18v Lithium-Ion (LXT)
Power Output: 640 w
Soft Application Max Torque: 60 Nm
Hard Application Max Torque: 115-125 Nm
Torque Settings: 21 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Twin / After-glow
Battery Capacity Indicator: Yes
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed High: 0-2100 rpm
No Load Speed Low: 0-550 rpm
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity: 13 mm
Screw Capacity: Machine Screw: 6 mm
Screw Capacity: Wood Screw: 10 x 90 mm
Drill Capacity: Concrete: 16 mm
Drill Capacity: Metal: 13 mm
Drill Capacity: Wood: 76 mm
Impact Rate High: 0-31500 bpm
Impact Rate Low: 0-8250 bpm
Overall Length: 205 mm
Net Weight (Approx) with 1.5/2Ah Batt: 2.5 kg
Net Weight (Approx) with 3/4/5Ah Batt: 2.7 kg
NOISE & VIBRATION Sound Pressure Level (LpA): 85 dB (A)
Sound Power Level (LWA): 96 dB (A)
Sound Uncertainty (K): 3 dB (A)
Drilling Concrete Vibration Emission (ah): 6.5 m/s²
Drilling Concrete Vibration Uncertainty (K): 1.5 m/s²
Drilling Metal Vibration Emission (ah): 2.5 m/s²
Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

DTD170Z Impact Driver

Voltage: 18v
Battery Compatibility: 18v Lithium-Ion (LXT)
Max Torque: 175 Nm
Brake Type: Electric
LED Job Light: Yes / Twin / Pre-glow / After-glow
Battery Capacity Indicator: Yes
Rotation: Forward & Reverse
Variable Speed Control Trigger: Yes / + 4-Stage Impact Power Selection
No Load Speed: Max: 0-3600 / H: 0-3200 / M: 0-2100 / S: 0-1100 rpm
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M16
High Tensile Bolt Capacity: M5-M14
Coarse Thread Length Capacity: 22-125 mm
Max Impacts Per Minute: 4 Stages as below: Max: 0-3800 / H: 0-3600 / M: 0-2600 / L: 0-1100 ipm
Driving Shank: 1/4" Hex
Overall Length: 117 mm
Net Weight (with 1.5/2Ah Battery): 1.2 kg
Net Weight (with 3/4/5Ah Battery): 1.5 kg

Standard Equipment

1x DHP481Z Combi Drill
1x DTD170Z Impact Driver
1x Depth Gauge
1x Side Grip Assembly
2x Belt Clip
2x BL1850B 5.0Ah Batteries
1x DC18RC Charger
1x Makpac Type 3 Carry Case

Warranty