Makita DLX2372TJ 18V SDS Plus Hammer Drill & Impact Wrench Twin Kit With 2x 5Ah Batteries

The Makita DLX2372TJ 18v twin kit feature brushless motors for longer run time and require virtually no maintenance. This kit comes with 2x 5.0Ah 18v Batteries and a DC18RC 14.4-18v Battery Charger in a MakPac Connector Case Type 4.

Features

DHR242Z SDS+ Rotary Hammer Drill
One touch slide chuck for SDS-plus bit
Easy-to-grip handle
Ergonomically designed to give maximum power thrust
Provides a sure and comfortable grip in any operation
3 mode operation: Rotation + Hammering, Hammering only & Rotation only
The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges

DTW300Z Impact Wrench
Efficient BL™ Brushless Motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge
The electronically-controlled BL™ Brushless Motor efficiently uses energy to match torque and RPM to the changing demands of the application
3 forward and 3 reverse Auto-Stop modes for increased efficiency
4 Stage power selection for optimum rpm and fastening torque 330 Nm of Max Torque and 580 Nm of Nut-Busting Torque
XPT technology that protects against dust & moisture
LED Job light with pre-glow and after-glow functions
Compact and ergonomic design at only 144 mm long
Rubberised soft grip provides increased comfort on the job
Equipped with Star Protection Computer Controls™ to protect against overloading, over-discharging and over-heating

Specification

DHR242Z SDS+ Rotary Hammer Drill
Max in Steel: 13 mm
Max in Wood: 27 mm
Max in Concrete: 24 mm
No Load Speed: 0-950 rpm
Blows per Minute: 0-4,700 bpm
Single Impact Energy: 2.0J
Vibration: 15/sec2
Charging Time: Approx 22 min
Net Weight: 3.3 kg

DTW300Z Impact Wrench
Voltage: 18v LXT
Driving Shank: 1/2" Square
Max. Fastening Torque: 330 Nm
Nut Busting Torque: 580 Nm
Blows per Minute (Hi): 0 - 3400 ipm
Blows per Minute (Med): 0 - 2600 ipm
Blows per Minute (Lo): 0 - 1800 ipm
Standard Bolt: M10 - M20
High Tensile Bolt: M10 - M16
No Load Speed (Max): 0 - 3200 rpm
No Load Speed (Hard): 0 - 2600 rpm
No Load Speed (Med): 0 - 1800 rpm
No Load Speed (Soft): 0 - 1000 rpm
Net Weight: 1.5 - 1.8 kg
Noise Sound Pressure: 97 dB(A)
Noise Sound Power: 108 dB(A)
Noise K Factor: 3 dB(A)
Vibration Fastening Bolt: 12.5 m/sec²
Vibration K Factor: 1.5 m/sec²

Standard Equipment

1x DHR242Z SDS+ Rotary Hammer Drill
1x DHR242Z Side Handle
1x DHR242Z Depth Stop
1x DTW300Z Impact Wrench
1x Belt Clip
1x DC18RC Charger
2x BL1850B Batteries
1x MakPac Connector Case Type 4

Warranty