Makita DLX4138TX1 18V LXT 4 Piece Brushless Kit With 3x 5.0Ah Batteries

This Makita 4 piece kit includes 1x DHP485 Combi Drill, 1x DTD153 Impact Driver, 1x DHR242 SDS+ Rotary Hammer Drill & 1x DML815 LED Torch. Plus, 3x 5.0Ah Batteries, 1x DC18SD Charger & 1x Toolbag.

Features

DHP485 COMBI DRILL
eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Forward & reverse
Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
21 clutch settings deliver up to 50Nm of torque
All metal gears and gear housing for more efficient power transmission
Ultra-compact design (only 182mm long)
Dual LED job lights with pre-glow and afterglow features
13mm Keyless chuck – for easy bit installation/ removal by one hand

DTD153 IMPACT DRIVER
eXtreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
Compact design with an overall length of only 126mm
One touch sliding chuck for easy bit installation and removal
Brushless DC motor with high power to weight and size ratio
Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
Battery protection system provides over-discharge, temperature and current protection for enhanced performance, battery cycle life and overall battery life
LED job light with pre-glow
Ergonomic soft rubber grip design for vibration absorption and comfortable operation

DHR242 SDS+ ROTARY HAMMER DRILL
Able to drill in concrete as fast or faster than 24v Cordless Combination Hammer model BHR200
One touch slide chuck for SDS-plus bit Easy-to-grip handle
Ergonomically designed to give maximum power thrust
Provides a sure and comfortable grip in any operation
3 mode operation: Rotation + Hammering, Hammering only & Rotation only
The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
High productivity achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges

DML815 TORCH
Up to 54 hours of illumination with a BL1860B 6.0Ah battery (sold separately)
A 12 position (0° - 170°) pivoting head with positive stops
160 Lumens from 4 x 0.5W LEDs
LEDs provide a sharp, round spotlight

Specification

DHP485 COMBI DRILL
Battery Capacity: 18v Li-Ion
Impact Rate Low/High: 0-7,500/0-28,500 ipm
Max Drill Masonry: 13 mm
Max Drill Steel: 13 mm
Max Drill Wood: 38 mm
No Load Speed Low/High: 0-500/0-1,900 rpm
Blows per Minute Low/High: 0-7,500/0-28,500 bpm
Max Tightening Torque Hard/Soft: 50/27 Nm
Overall Length: 182 mm
Net Weight: 1.5-1.8 kg

DTD153 IMPACT DRIVER
Voltage: 18v
Max Torque (Nm): 170
Brake Type: Electric
LED Job Light: Yes / Pre-glow
Battery Capacity Indicator: No
Battery Compatibility: 18v
Lithium-Ion (LXT) Rotation: Forward & Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM): 0-3400
Machine Screw Capacity: M4-M8
Standard Bolt Capacity: M5-M16
High Tensile Bolt Capacity: M5-M14
Coarse Thread Length Capacity (mm): 22-125
Max. Impacts Per Minute (ipm): 0-3600
Driving Shank: 1/4" Hex Overall Length (mm): 126
Net Weight (Kg with 1.5/2Ah Battery): 1.3
Net Weight (Kg with 3/4/5Ah Battery): 1.5
Brushless Motor: Yes

DHR242 SDS+ ROTARY HAMMER DRILL
Max in Steel: 13mm
Max in Wood: 27mm
Max in Concrete: 24mm
No Load Speed: 0-950rpm
Blows per minute: 0-4,700bpm
Single impact energy: 2.0J
Vibration: 15/sec2
Charging Time: Approx 22 min
Net Weight: 3.3kg

DML815 TORCH
Voltage: 14.4 or 18 v
Battery Type: Li-ion
Length: 272 mm
Width: 79 mm
Height: 116 mm
LED's: 4 x 0.5 w
Torch Positions: 12
Illumination: 160 lx
Net weight: 0.26 - 0.93 kg

Standard Equipment

1x DHP485 Combi Drill
1x DTD153 Impact Driver
1x DHR242 SDS+ Rotary Hammer Drill
1x DML815 LED Torch
3x 5.0Ah Batteries
1x DC18SD Charger
1x Toolbag

Warranty