UNIKA Sink & Hob Aperture Jig

The jig features four sets of radius curves, left and right hand, at 100, 80, 60 & 40mm radii. It also features a 90°angle, left and right hand, and a central slot that will enable you to cut straight cuts up to 480mm long.
In addition, each set of radius curves is paired with a set of peg holes that will set the jig at 50mm from the edge of the worktop if desired.
PLEASE NOTE: This jig is designed to cut internal curves and cuts for internal apertures only. Though it may be possible to rout external curves with this jig please note that the user does so at their own risk as this jig has not been designed for this function.

Features

12mm Hardwearing Compact Laminate Material
Guaranteed Never to Warp
Multiple Applications
The jig has four sets of radius curves, left and right hand at 100, 80, 60 & 40mm radious
Left and Right hand 90° Angles and a central slot that will enable you to cut straight cuts up to 480mm long
Each set of radius curves is paired with a set of peg holes that will set the jig at 50mm from the edge of the worktop

Standard Equipment

1x UNIKA Sink & Hob Aperture Jig